Port, Application, And Encryption Blade Led - IBM System Storage SAN384B-2 Installation, Service And User Manual

1
2
Figure 25. FX8-24 extension blade
Table 8 describes the port, application, and encryption blade LED patterns and the
recommended actions for those patterns.
Table 8. Port, application, and encryption blade LED descriptions
LED purpose
Blade power LED
Blade status LED
58
SAN384B-2 Installation, Service, and User Guide
3 4 5
6
1
Status LED
2
Power LED
3
GbE port 6
4
Port status LED for GbE port 6
Color
Steady green
No light (LED is off)
No light (LED is off)
Steady amber
Slow-flashing amber (on 2
seconds, then off 2 seconds)
Fast-flashing amber (on 1/2
second, then off 1/2 second)
7
5
10GbE (XGE) port 0
6
Port status LED for 10GbE port 0
7
Port map
Status
Blade is enabled.
Blade is not powered on.
Blade is either healthy or does
not have power.
Blade is faulty.
Blade is not seated correctly or
is faulty.
Environmental range exceeded. Check for out-of-bounds
Recommended Action
No action required.
Ensure that the blade is firmly
seated and either the
thumbscrew is fully engaged
or the slider is pushed up and
the ejectors are fully engaged.
Verify that the power LED is
on.
Ensure blade is firmly seated
and check the status with the
slotShow command. If the
LED remains amber, contact
IBM.
Pull blade out and reseat it. If
the LED continues to flash,
replace the blade.
environmental condition and
correct it.