Port Numbering; Attaching The Vertical Cable Management Finger Assemblies To The Cabinet Rails - IBM System Storage SAN384B-2 Installation, Service And User Manual

Figure 15. Attaching the vertical cable management finger assemblies to the cabinet rails
15. Disassemble and pack the lift tool into the shipping crate. Follow the return
Note: For turning on the power and for the configuration instructions, see
Attention: Do not connect the SAN384B-2 to the network until the IP addresses
are correctly set.

Port numbering

Table 6 provides a list of available port and application blades for the SAN384B-2.
instructions provided.
Chapter 3, "Starting and configuring the SAN384B-2," on page 33.
Table 6. Port and application blades available on the SAN384B-2
Blade label IBM blade name
FC16-32 32 port 16Gbps Switch Blade
FC8-32E 32 port 8Gbps Enhanced Port Blade
FC16-48 48 port 16Gbps Switch Blade
FC8-48E 48 port 8Gbps Enhanced Port Blade
FC8-64 64 port 8Gbps Switch Blade
FX8-24 FCIP 8 Gbps extension blade
Feature code
3632
3633
3648
3649
3864
3890
Chapter 2. Installing a SAN384B-2 in a cabinet
29