Removing And Replacing A San384B-2 Chassis; Full Mesh Icl Topology For San384B-2 And San768B-2 Chassis - IBM System Storage SAN384B-2 Installation, Service And User Manual

Figure 49. full mesh ICL topology for SAN384B-2 and SAN768B-2 chassis

Removing and replacing a SAN384B-2 chassis

This section describes how to remove and replace the SAN384B-2 chassis (with its
backplane). The basic steps are:
v "Verifying need for replacement" on page 99
v "Recording critical SAN384B-2 and SAN information" on page 99
v "Disconnecting from the network and fabric" on page 102
v "Removing components from the chassis" on page 103
v "Removing a SAN384B-2 from the cabinet" on page 104
v "Installing the replacement chassis" on page 105
v "Installing components into the new chassis" on page 105
98
SAN384B-2 Installation, Service, and User Guide
Trunked ICLs
Trunked ICLs
Trunked ICLs