Control Processor Blade (Cp8) Ports And Leds - IBM System Storage SAN384B-2 Installation, Service And User Manual

2. Check port blade status by entering theslotShow and haShow commands.
Figure 26 shows the control processor blade (CP8) and component parts.
2
1
Figure 26. Control processor blade (CP8) ports and LEDs
60
SAN384B-2 Installation, Service, and User Guide
3 4 5 6 7
1
Blade power LED
2
Blade status LED
3
USB LED
4
USB port
Table 9. CP blade LED descriptions
LED purpose Color
Power Steady green
No light (LED is off)
Status No light (LED is off)
Steady amber
Slow-flashing amber
(on 2 seconds; then
off 2 seconds)
Fast-flashing amber
(on 1/2 second; then
off 1/2 second)
8
5
Console serial port (IOIOI)
6
Ethernet port (MGMT)
7
Ethernet port (SERVICE)
8
Active CP LED
Status
CP blade is on.
CP blade is not on.
CP blade is either
healthy or does not
have power.
CP blade is faulty or
the switch is still
booting.
CP blade is not
seated correctly or is
faulty.
Environmental range
exceeded.
Recommended
Action
No action required.
Ensure that the blade
is firmly seated and
has power.
Verify that the power
LED is on.
Ensure that the blade
is firmly seated and
the switch has
completed booting. If
the LED remains
amber, contact IBM.
Pull the blade out
and reseat it. If the
LED continues to
flash, replace the
blade.
Check for
out-of-bounds
environmental
condition and correct
it.