Verifying Correct Operation Of System - IBM System Storage SAN384B-2 Installation, Service And User Manual

Verifying correct operation of system

1. Log in to the SAN384B-2 as admin:
switch:admin> login
login: admin
password: xxxxxxxx
switch:admin>
2. Enter the slotShow -m command and verify that all the installed cards are
detected and that their status is operational (enabled).
switch:admin> slotShow -m
Slot Blade Type ID Model Name Status
--------------------------------------------
1 SW BLADE
2 SW BLADE
3 CORE BLADE 46 CR16-4
4 CP BLADE
5 CP BLADE
6 CORE BLADE 46 CR16-4
7 SW BLADE
8 SW BLADE
switch:admin>
3. Verify that the system is functioning correctly by entering switchShow or
switchStatusShow. The switchShow command displays the SAN384B-2 and
port status information.
SAN384B-2_130:admin> switchshow
switchName: SAN384B-2_130
switchType: 121.3
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 130
switchId: fffc82
switchWwn: 10:00:00:05:33:03:2c:00
zoning: ON (ZONE_CONFIG_NAME)
switchBeacon: OFF
FC Router: ON
FC Router BB Fabric ID: 10
Address Mode: 0
Index Slot Port Address Media Speed
=======================================================
0 1
10:00:00:05:1e:f8:a0:b4
1 1
10:00:00:05:33:26:0e:65
2 1
10:00:00:05:33:48:5e:f5
3 1
10:00:00:05:1e:f8:a0:b3
<output truncated>
4. Verify that all the IP address information is correct by entering ipAddrShow
and checking the results against the IP information recorded in the
"config-miscinfo.txt" file.
switch:admin> ipaddrshow
SWITCH
Ethernet IP Address: xxx.xxx.xxx.12
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
CP0
Ethernet IP Address: xxx.xxx.xxx.10
97 FC16-32 ENABLED
77 FC8-64
ENABLED
50 CP8 ENABLED
50 CP8 ENABLED
ENABLED
96 FC16-48
77 FC8-64
0 820000 id N8
1 820100 id N8
2 820200 id N8
3 820300 id N8
ENABLED
ENABLED
ENABLED
State Proto
Online FC F-Port
Online FC F-Port
Online FC F-Port
Online FC F-Port
Chapter 5. Removing and installing components
107