How To Install H - Sanyo MCO-19M Service Manual

How to install H

and Electric lock
Parts enclosures
Plate meeting Transformer
Connector (White, 3P)
Wire (Red)
Rear cover
Door under cover
O decontamination kit MCO-HL
2 2
Water proof
Lock and key
connector
Wire (Brown)
Cover support
Screw (M4)
Screw (M5)
Cap (M4)
Name plate
Caution label
Mount transformer on plate meeting and
secure with screws (M4) and connect
each wires (red and brown) to the places
as left picture specified.
Screw (M4)
Remove rear cover.
Remove Inner cabinet rear cover, 2pcs of
Water proof
frame under cover and door under cover.
connector
Fit water proof connector to the place as
the arrow pointed in the picture.
Note) Mark triangle should be oriented to
Inner cabinet rear cover
upper position.
Fit 2 caps (M4) to the holes at cover
Frame under cover
support.
Cap (M4)
- 88 -
Tools
Philips Screwdriver
Wrench (8mm)