Releasing The Key Lock - Sanyo MCO-19M Service Manual

Releasing the key lock

1. To remove the key lock, change the value of the key lock parameter from 1 to 0 on the Stand-by
Setting Display and press the ENTER Key.
S t a n d - b y
1
T e m p e r a t u r e
2
C O 2 D e n s i t y
3
O 2 D e n s i t y
4
5
K e y L o c k
H i g h
6
2. The cursor will move to the Password Field. Input the 4-digit password (default: 0000) and press the
ENTER Key. When key lock is released, the buzzer will sound briefly, and "Key Lock" will disappear from
the Stand-by Setting Display.
S t a n d - b y
1
T e m p e r a t u r e
2
C O 2 D e n s i t y
3
O 2 D e n s i t y
4
5
K e y L o c k
H i g h
6
3. Press the MENU Key to display the menu, select OK and press the ENTER Key. The settings will be
saved.
Note: The buzzer will sound for a long time if the wrong password is entered. Enter the correct password.
The password for releasing the key lock must be shared and administered among all users of the
Incubator. The password is set to 0000 when the Incubator is shipped from the factory. The procedure for
changing the password is given next.
27
S e t t i n g
3 7 . 0
5 . 0 %
5 . 0 %
L i m i t 5 2 . 0
S e t t i n g
3 7 . 0
5 . 0 %
5 . 0 %
L i m i t 5 2 . 0
K e y L o c k
o o
C ( 0 . 0
( 0 . 0 %
( 1 . 0 %
( 2 2 . 0 %
0 ( 0 . U n l o c k
o
C
K e y L o c k
o o
C ( 0 . 0
( 0 . 0 %
( 1 . 0 %
( 2 2 . 0 %
0 P a s s w o r d
o
C
- 134 -
o
C - 5 0 . 0 C )
- 2 0 . 0 % )
- 1 8 . 0 % )
- 8 0 . 0 % )
1 . L o c k )
o
C - 5 0 . 0 C )
- 2 0 . 0 % )
- 1 8 . 0 % )
- 8 0 . 0 % )