Sanyo MCO-19M Service Manual page 47

7. Setting of Date and time
<Setting of date and time>
Ex How to set 6:45:38 p.m. on May 17
0 In Top Screen, press MENU key and select "Tools".
1 Press ENTER key and select "Date Time" in the "Select Tools (1/2)" display.
2 Press MENU key and select "OK".
3 Press ENTER key and input "100517" in the right side of "Date" column in the "Date
Time" display.
4 Press ENTER key and input "184538" in the right side of "Time" column.
5 Press MENU key and select "OK".
6 Press ENTER key and "Select Tools (1/2)" display is appeared.
<Setting of Log intervals>
The intervals for acquiring log data.
Input a value in the right side of "Log Interval" column in the "Date Time" display.
Press MENU key and select "OK" and press ENTER key.
Input range is 2~30 minutes (Factory default: 6 minutes)
Note) When you input a value lower than "2", Log interval is automatically set in 2 minutes.
When you input a value higher than "30", Log intervals is automatically set in 30 minutes.
th
2010
Procedures
- 44 -
MENU key
Tools
OK
OK