Sanyo MCO-19M Service Manual page 5

Name
Model
Accessories
Weight
Optional accessories
MCO-19M
3 trays, 3 sets of tray support, 1 gas tube, 1 humidifying pan
1 gas injection nozzle, 1 tube for gas injection nozzle,
1 pair of stacking plate A and B, 2 protective stickers, 6 tube bands
UV Lamp Add-on kit
MCO-19UVS
H O
2 2
H O Decontamination Reagent MCO-H2O2
2 2
Automatic CO
2
Gas pressure regulator MCO-100L
Extra tray MCO-47ST including 2 tray supports,
Automatic CO
2
UV lamp replacement kit (MCO-20UV)
Stacking spacer (MCO-18SB, when stacking on the MCO-175)
Stacking spacer (MCO-21SB, when stacking on the MCO-20AIC)
Ethernet (LAN) Interface (MTR-L03), RS232C/RS485 Interface (MTR-480)
SANYO Data acquisition software (MTR-5000)
4-20mA Interface (MCO-420MA, USA only)
- 2 -
Multi-gas Incubator
94 kg
MCO-19UVS is standard equipment
H O generator MCO-HP
2 2
Decontamination kit MCO-HL
density Calibration Add-on Kit MCO-SG
Half tray MCO-25ST ,
cylinder changeover system MCO-21GC
Roller base MCO-18RB
MCO-19M(UV)