Sanyo MCO-19M Service Manual page 86

9. Connect each lead wire connectors of Ballast and Glow Ass'y as shown in Fig. 8
Glow starter (FG-7P)
For MCO-19AIC/19M
10. Labels layout
Put each label on the specified place. Use the name plate of MCO-19M(UV) for MCO-19M.
Main PCB
CN14
white
White
White 2P
Light blue
Power trans.
Fig. 8
UV door switch caution label
UV lamp caution label
- 83 -
Blue 2P
White
UV lamp
White 2P
Blue 1P
Yellow
Red 2P
Green 1P
Connect them after
Noise filter
removing each cover
White 9P
Name plate
Fig. 9
For MCO-18AIC
Glow starter (FG-7P)
White 3P
Ballast