Sanyo MCO-19M Service Manual page 65

<Display in H2O2 decontamination>
H2O2 misting time
H2O2 resolution time
(Note) UV resolution is commenced in the above display.
Hardware status
When "H2O2 Decon" blinks in reverse video, H2O2 is misting.
When "Decon" blinks in reverse video, H2O2 is preserving. (H2O2 is not misting)
UV resolution
When "UV Resolve" blinks in reverse video, UV resolution is commenced.
Current temperature in H2O2 decontamination
Door status
When an electric lock is active, "Locked" is displayed in the right of "Door".
Error message
When an error is occurred in H2O2 decontamination, an error message is displayed.
Message to operator
A message is displayed when H2O2 decontamination is complete.
Ex.) Please Remove H2O2 Unit
Step in H2O2 decontamination
Current step is displayed during H2O2 decontamination
- 62 -