Specifications; Structural Specifications - Sanyo MCO-19M Service Manual

Specifications

Strucutural specifications
Name
Model
External dimensions
Internal dimensions
Interior volume
Exterior
Interior
Outer door
Inner door
Gas tight split door
Tray
Access port
Insulation
Heating system
Heater
Humidifying system
Temperature controller
Temperature display
CO controller
2
CO density display
2
O controller
2
O density display
2
Air circulation
Air filter
UV lamp
Water level sensor
Alarms
Remote alarm contacts
CO inlet connection
2
CO inlet pressure
2
O inlet connection
2
O inlet pressure
2
MCO-19M
W620 x D710 x H900 mm
W490 x D523 x H665 mm
Stainless steel containing copper
Stainless steel with gasket
4 doors made of temperared glass
3 trays, made of stainless steel containing copper
Dimensions; W450 x D450 x H12 mm, Maximum load; 7 kg/tray
Inner diameter; 30 mm, On the back side
Rigid-polyurethane foamed-in place
DHA system Heater jacket and air jacket
Natural evaporation with humidifying pan
Digital display Resolution: 0.1
Digital display (Resolution: 0.1%
Digital display (Resolution: 0.1%
0.3μm, Efficiency: 99.97 % or more
(Option)
Automatic set temperature alarm, automatic set CO
Automatic set O density alarm, Upper limit temperature alarm,
2
various gas/sensor/heater alarms, Door alarm, UVlamp failure
Allowable contact capacity: DC 30 V, 2 A
Diameter; 4 6 mm tube
0.03 MPaG 0.3 kg/cm
Diameter; 4 6 mm tube
0.05 MPaG 0.5 kg/cm
- 1 -
Multi-gas Incubator
MCO-19M(UV)
162 L
Painted steel
Painted steel
314 W
PID control system
o
PID control system
PID control system
Fan assisted
4 W×1 (Ozone-free emission)
Optical type
2
G, 4.3psiG
2
G, 7.1psiG
C
density alarm,
2