Control Specifications; Performance Specifications - Sanyo MCO-19M Service Manual

Control specifications

Model
Thermal sensor
Temperature display
CO controller
2
CO density display
2
Water level detection
H O decontamination
2 2
(Option)
Electric lock (Option)
UV system
Self-diagnosis

Performance specifications

Model
Temperature control range
Temperature distribution
Temperature variation
CO control range
2
CO variation
2
O control range
2
O variation
2
Chamber humidity
Rated voltage, frequency
Amperage
Heat emission
Power consumption
Noise level
Usable environment condition
Note) Specifications will be subject to change without notice.
MCO-19M
Thermistor
LCD digital display
Microcomputer; Input by keypad
CO density setting range: 0
2
Non-volatile memory
LCD digital display (Resolution; 0.1 )
Water level sensor Optic type
- Microwaved H O decontamination
2 2
- Low density H O solution (Oxidor) which can be purchased in the market
2 2
- Solution level detection by sensor
Outer door is locked during H
Option. UV lamp lighting time can be
extended automatically
- Error code and error information are displayed by text.
- Remote alarm contact activates (DC30V, 2A) with buzzer sounds.
MCO-19M
Ambient temp. +5 50
o
±0.25 C ambient temp; 25
o
±0.1 C ambient temp; 25
±0.15 % ambient temp; 25
±0.2 % ambient temp; 25
110~120V, 60Hz
Max. 3.1A
Max. 1274 kJ/h
Max. 354 W
Temperature: 5~35
Designed performance may not be obtained when ambient temp. is equal
- 3 -
MCO-19M(UV)
20 Resolution; 0.1
O decontamination
2 2
UV lamp lighting time can be extended
automatically
o
C ambient temp; 5 35
o o
C setting; 37 C, CO
o o
C setting; 37 C, CO
0 20 %
o o
C, setting; 37 C, CO
1~18, 22~80 %
o o
C, setting; 37 C, CO
95±5%R.H.
220V, 60Hz
Max. 1.5A
30 dB (A scale)
o
C, Humidity: Equal or less than 80%R.H.
o
or lower than 15 C
MCO-19M(UV)
o
C
5%, O 5%, no load
2 2
5%, O 5%, no load
2 2
5%, O 5%, no load
2 2
5%, O 5%, no load
2 2
220~240V, 50Hz
Max. 1.5A
Max. 1206 kJ/h
Max. 335W