Table of Contents
Advertisement
Model 1630A/D/G
The Peripherals Menu
[PERIPHERALS] SYSTEM CONFIGURATION
In this menu, the way the analyzer will interact with peripherals through its interface connectors is set up . The
analyzer clock and beeper are also set from this menu . The analyzer beeps at predetermined points in
operation and when error conditions are detected . If desired, the beeper may be turned off. Figure 8-1 is the
peripherals menu of the 1630A/D . Figures 8-2 and 8-3 are the peripherals menu of the 1630G . Figure 8-3 has
messages and fields pertaining to inverse assemblers and configurations when they have been saved in
internal storage. See Appendix D for more information on storage operations .
1630A/D System [Peripherals] Specification Menu
Clock Set:
System Specification --------------------------------------------
Clock Set :
®ZK®
System Controller : NONE/TALK ONLY
HP-IB Printer Must be Set to LISTEN ONLY
Print
Non-waveform Menus in
Rear Panel Port :
Beeper :
1®
I Pulse on State Tracepoint
I
Figure 8-1 . 1630AID [Peripherals] System Specification
Chapter 8
The Peripherals Menus
Field used by analyzer to identify when information was captured into memory .
Enter [month] day year hour: minute :second. Once set, this clock will continue to
keep time as long as analyzer power is on .
Print Non-waveform Menus:
Selects code for information transfer to external printer.
[Text] selects information transfer using ASCII codes.
[Graphics] selects information transfer using HP-GRAPHICS codes.
Hide quick links:
Advertisement
Table of Contents
