Appendix A Display Messages - HP 1630A Operating And Programming Manual

Model 1630A/D/G
Display Messages
Delaying - This message pertains to a trace in progress .
Appendix A
Display Messages
This appendix lists and defines each of the status, error, and prompt messages that the analyzer presents on
screen .
All names must be unique -This message is displayed when a name has been created that is identical to one of
the other names already in use on that menu .
At least 1 clock edge required - This message is displayed when the CLOCK field in the state FORMAT
specification is set up so that no clock line is active.
Continuous trace in process -This message is displayed when the analyzer has a continuous trace in process,
such as during the execution of an overview measurement .
Data acquired Month, Day, Year, Time-This message indicates when the current trace data was acquired . The
initial setting is filled in from the clock set in the system peripherals menu . If the clock was not set when the
trace was taken, this message will not be displayed at all .
Delay too big for sample period - This message is displayed when a trigger delay is selected, in the timing
TRACE specification, that is too long for the analyzer to measure using its present sample period selection .
DELETE to remove field-This message is displayed on menus which have all available fields assigned, such as
when the state [Assignment] menu of the FORMAT specification has8labels assigned. This message prompts
to delete fields from a full menu .
DELETE(write) / DEFAULT required - This message is displayed when an entry has been made in the
highlighted file description line . Either press the DELETE key to write the instrument configuration to that tape
file, or press the DEFAULT key to return the edited line to its previous unedited condition .
Each label must have a name-This message is displayed when INSERT is pressed to create a new label, before
making any entry into the field for naming that new label .
ERROR cassette contains non HP1630 data - This message is displayed when the analyzer reads directory
information that is not as written by the analyzer . The tape can be erased and reformated if it is still to used with
the analyzer .
ERROR configuration too complex - The current state of the analyzer is too complex to be stored in internal
storage. Simplify the analyzer configuration before retrying the operation . The power-up configuration is the
simplest of all .
ERROR CRC does not match - This message is displayed when the Cyclic Redundancy Check (CRC) value
read in during a learn string or down-loaded program did not match the CRC value calculated by the analyzer
when it received the data. Could also mean an attempt was made to load an inverse assembler from internal
storage that was corrupt .
ERROR directory full - the directory on the currently inserted disc has no more room for entries . Delete
unwanted files before attempting to store to this disc.
ERROR disc changed - The disc has been changed since the last INSERT to check for disc was performed .