Figure 4-36 . The [Compare/Edit Compare] List - HP 1630A Operating And Programming Manual

State Measurements Model 1630A/D/G
4- 2 8
NOTE
When using the 1630A/D, move cursor into the inverse video field and enter
compare item . DON'T CARE (X) identifies channels which will not be included in
the comparison for the line .
d. Up to 16 lines may be entered for the compare list .
NOTE
To delete a line from the compare list, place the line to be deleted in the center
inverse video field and press the blue shift key and DELETE .
7. Move the cursor to the [Mark] field and change it to [Show] . The compare list will be displayed as in
figure 4-36 .
®® Listing __-_________________________________ __
Label> ABBR DATA STRT Time
Base >
-0001
+0002
+0006
+0009' .
+0013
Figure 4-36 . The [Compare/Edit Compare] List
8. Press RUN. The analyzer will run a continuous trace until the trace does not have the same events on the
lines specified in the compare list . Figure 4-37 is the first trace taken which is not the same as the
compare list .
Listing___________________-__________________-
Label% NDDR DATA
STRT Time
B.sse
0092 R +0002 38
6:
STRC&. +0f_g0F
0E
'9 STRIK +0011 0B
+0013 A +0006
1-9
Figure 4-37 . Trace Taken in Compare [until
~4] Mode