Figure 4-33 . Store Qualifying Data Between Sequence Terms; Figure 4-34 . Maximum Amount Of Resource Terms For The State Trace Specification - HP 1630A Operating And Programming Manual

State Measurements
Model 1630A/D/G
4- 2 6
4 . Move the cursor to the [start] field and select [center] with the NEXT[] key. Three more fields for
resource terms are automatically added, one after each of the first three sequence terms. The added
fields are shown in figure 4-33 .
NOTE
Use ROLL up key to see resource terms c and d .
State Tray-.e Specification______-DELETE to remove field________
[~® trace mode
In ~ - eguence
find
,.ring
he, store
, . l-n- restart on ® .r ® r ®or
La be I% ADDR DHTH STHT
Base ; ®
r ing
toning
toning
race on ~ .r-r-iurre
Figure 4-33 . Store Qualifying Data Between Sequence Terms
5. Move the cursor to any of the storing fields (while storing on the 1630A/D), and use the NEXT[] or
PREV[ ] key to specify one resource term .
6. To OR store qualifiers between sequence terms, press INSERT to add as many as four ORed store
qualifiers . The maximum amount of store qualifiers are shown in figure 4-34 . In fact, figure 4-34 contains
the maximum amount of resource terms used for sequence triggering, sequence restart, and store
qualifying .
NOTE
Use ROLL up key to see resource terms c and d.
State Tr .ar-e Specificctim,_ __ DELETE t . iemo--e field-_
trace rr~ocle
b
Label? HDDP DHTH STMT
Base
storing
at ., ng ~.r ~
of
storing
trace on
occurrer
tae, l
- I~ .~1 C-t7 L-r7 Ccl 7
I rl
I
C-J 7
c1
Figure 4-34 . Maximum Amount of Resource Terms For the State Trace Specification