Data Rates Submenu Command (Access Point Mode Only) - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
6.3.6 Data Rates Submenu Comm
Variable S etting of the Transmission Rates
F om the table r
(8 02.11b, g, a
access point will t
w ith the clients
T he "Basic Rate" parameter specifies that a client must be capable of this data rate
to be a ble to connect to the access point.
Figure 6-2
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
and (access point mode only)
sh owing all available data rates for the current WLAN mode
etc .), you can select any combination of these data rates. The
hen use only the selected tra
.
"edit" Screenshot:
nsmission rates for communication
160