Siemens SCALANCE W788-1PRO Operating Instructions Manual page 247

Configuration Using Web Based Management and the Command Line Interface
Syntax of the Command Line Interface
CLI\INF ORM\ SIGNAL
Command
recstart <interval>
[quantity recording points]
recstop
dispstart [interval]
dispstop
exit
info
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
>
Starts signal recording.
The interval at which the cur
signal is recorded can be be
and 1000 milliseconds.
A value between 1 and 20000 i
possible for the number of rec
points.
Stops signal recording prem
Displays the cu
cyclically on the CLI.
The interval can
and 10000 milliseco
Stars cyclic output of the
strength.
Closes the CLI/TELNET
Displays the param
signal recorder
Description
rent
twee n 1
s
ord ing
aturel y.
rrent signal stren gth
be between 100
nds
signal
connection.
eters of the
Comment
This command is only
available in the client
mode.
This command is onl y
available in the clie nt
mode.
This command is only
available in the client
mode.
This command is only
available in the client
mode.
This command is only
available in client mode
This command is only
available in client mode
247