Ip Settings Menu Command - Siemens SCALANCE W788-1PRO Operating Instructions Manual

Configuration Using Web Based Management and the Command Line Interface
Command
name [system name]
location [loc ation]
contact [nam ] e
ping [[-c N] | [ s]] < - IP>
password [a dmin|user]
[password]
6.2.2 IP Settings Menu Command
Configuration
Here, you decide whether you will use a DHCP server or whether you want to
assign a fixed IP address to the SCALANCE W78x
address of a router and the default TTL. The TTL (time to live) parameter specifies
the maximum number of routers
discarded.
No e t
If you use a Radius server for authentication, this must the accessible over the
m an agement VLAN.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Desc ription
Assigns a value to the sysName MIB
variable.
Assigns a value to the sysLocation MIB
variable.
Assigns a value to t he sysContact MIB
variable.
For connection test to partner.
-c (count er) for the number (N) of ICMPs
and -s (stop) to stop ICMP frames.
Specifies a password for access to the
SCALANCE W78x.
passed through by a data packet before it is
Comment
Maximum of 255
characters. If you want
to use the name in WDS
or redundancy, the
maximum length is 32
characters.
Maximum of 255
characters.
Maximum of 255
characters.
Telnet only
Maximum of 31
characters.
. You can also set the IP
112