Siemens SCALANCE W788-1PRO Operating Instructions Manual page 26

The LEDs have the following significa
LED
P1
L2
R1
LED
R2
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Color
Yellow Data transfer over the Ethernet interface (traffic).
Green There is a connection over the Ethernet interface. (Link)
Yellow flashing PRESET-PLUG detected.
Yellow/green PRESET function completed successfully.
Green flashing "Flashing" enabled over PST.
Green Power supply over the hybrid connector X1 (PoE or
energy contacts).
Yellow Data transfer over the first WLAN interface.
Green Access Point Mode:
The WLAN interface is initialized and ready for operation.
Client Mode:
There is a connection over the first WLAN interface.
Green flashing Access Point Mode:
The channels are scanned.
Client Mode:
The client is searching for a connection to an access point or
ad hoc network.
Green flashing Access Point
quickly With 802.11h
primary users before the channel can be used for data traffic
Client Mode:
The client waits for the adopt MAC addr
<Aut o Find Adopt MAC> and is connected to no access point.
Yellow flashing PRESET-PLUG detected.
Green Clie nt Mode:
3x fast,
The client waits for the adopt
1x long
<Auto Find Adopt MAC> a
flashing
Yellow/green PRESET function completed successfully.
Color
Yellow Access Point Mode:
Data transfer over the second WLAN interface.
Client Mode:
The LED is always off because the 2nd interface is not
available in client mode.
Green Access Point Mode:
The WLAN interface is initialized and ready for operation.
Client Mode:
The LED is al
available in client mode.
Green flashing Access Point Mode:
The channels are scanned.
Client Mode:
The LED is always off because the 2nd interface is not
available in client mode.
Description of the SCALANCE W78x
nce:
Meaning
Mode:
the channel is scanned for one minute for
MAC address due to the setting
nd is connected to an access point.
Meaning
ways off because the 2nd interface is not
.
ess due to the setting
26