Siemens SCALANCE W788-1PRO Operating Instructions Manual page 142

Configuration Using Web Based Management and the Command Line Interface
Syntax of the Co mmand Line Interface
CLI\INTERFACES\ETHERNET>
Command
ethspeed [A |100F|100H|
10F|1 0H]
ethcross [E|D]
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Description
Specifies the transmission speed
and mode of the Ethernet interface:
A automat ic selection
by the SCALANCE W788
100F 100 Mbps full duplex
100H 100 Mbps half duplex
10F 10 Mbps full duplex
10H 10 Mbps half duplex
Manual selection of Ethernet
interface crossover. Possible only
when ethspeed is not set to auto.
Comment
142