Siemens SCALANCE W788-1PRO Operating Instructions Manual page 168

Configuration Using Web Based Management and the Command Line Interface
Inter SSID Communication check box
Selecting this check box allows communication between WLAN clients registered
at different SSIDs of an access point.
Example 1:
Example 2:
Note
On a SCALANCE W788-2xx, the Inter SSID communication function must
enabled on both WLAN interfaces or on all VAPs to allow communication between
the clients with different SSIDs.
Note
If VLANs are configured for the SSIDs, this setting can prevent communication
between the SSIDs according to the VLAN rules.
Intracell Communication list box
● Intracell blocking
This setting prevents WLAN client communication within an SSID.
● Ethernet blocking
This setting prevents WLAN client communication over the Ethernet interface
of the access point.
● Disabled
This setting enables both WLAN client communication within an SSID as well
as WLAN client communication over the Ethernet interface.
To illustrate the situation, there is an overview of the effects of the Inter SSID
Communication and Intracell Communication settings below.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
A SCALANCE W788-2xx w
each of the wireless cards.
A SCALANCE W788-1xx is used with multiple SSIDs.
as defined with different SSIDs for
be
168