Configuration Using Web Based Management and the Command Line Interface
Syntax of the Command Line Interface
CLI\IFEATURES\IPCF\WLAN1>
or for the second wireless adapter (if it exists)
CLI\IFEATU
RES\IPCF\WLAN2>
Command
ipcf [E|D]
pnio [E|D]
update [tim
e]
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Description
Enables or disables iPCF mode.
Enables or disables optimized PNIO
support.
Specifies th
e PNIO update
cyclic PNIO data exchange. This
value must match the configured
PNIO cycle time.
Comment
Only on SCALANCE
W788-xRR models
(access point).
time for
Only on
SCALANCE
W
788-xRR models
(a
ccess point).
218