Siemens SCALANCE W788-1PRO Operating Instructions Manual page 186

Configuration Using Web Based Management and the Command Line Interface
Ports
Port: Overview of
SSID: SS ID for WLAN interface
redundancy.
Priority: Configured
Port VID : VLAN ID d
Mem ber: The VLAN
Enabled : VLAN suppo
Clicking on a port op
Note
If you use a Radius server for authentication, this must the accessible over the
management VLAN. Among other things, the management port also handles the
functions: HTTP, HTTPS, WBM, Telnet, SSH, Ping, DHCP, TFTP, SNMP, SNTP
and Syslog.
Note
The IP and MAC-based nodes downstream from a client with enabled layer 2
tunneling function ( L2T client) adopt the same VLAN properties as the client.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
the ports in the form of a table.
, no entry for
priority of the port.
irectly ass igned to the port.
membership assigned to the port.
rt can then be enabled / disabled dire
ens the VLAN S ettings configuration page.
WDS or manageme nt and
ctly.
186