Basic Wizard; Ip Settings - Siemens SCALANCE W788-1PRO Operating Instructions Manual

5.4

Basic Wizard

5.4.1 IP Settings
Descriptio n
One of the basic steps in configuration of an Ethernet device is setting the IP
address. The IP address identifies a device in the network uniquely. On this page,
you enter the information for IP configuration of the SCALANCE W78x.
Specified I P Address / DHCP Server Option buttons
There are two methods of assigning IP addresses to
be set as a fixed permanent address or can be obtained dynamically from a DHCP
server. Select "
IP Address input box
The IP address of the SCALANCE W78x. Here, you enter an address that is
unique within the network.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Configuration Using the Wizards of Web Based Management
Specified IP Address" if you do not use a DHCP server.
devices: The IP address can
63