5.6.2
Security Settings for WLAN
Security Settings with iPCF
On this page, you specify the security level for the client. iPCF is a proprietary
standard
optimized for fast roaming and deterministic data transfer. With the
current security mechanisms 802.1x and WPA, keys are negotiated using relatively
time-consuming mechanisms, and they are therefore not available with iPCF.
Security le
vel list box
Select the security level you require for your wireless network in this box. The
following are possible:
●
None (no encryption)
An open system without encryption.
●
Med (encryption)
Static keys are used. This is the recommended setting and you should use a
128-bit AES key.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Configuration Using the Wizards of Web Based Management
96