Configuration Using Web Based Management and the Command Line Interface
6.2.4
Restart Menu Command
Restart button
Click this button to restart the SCALANCE W78x. During a restart, the
SCALANCE W78x is reinitialized, the internal firmware is reloaded, and the
SCALANCE W78x runs a self-test. The entries that have been learned in the
address table of the SCALANCE W78x are deleted. You c
window open while the SCALANCE W78x restarts.
R
estore M
emory Defau
Click this button to reset the configuration. The following parameters (protected
defaults) are not reset:
●
IP address
●
Subnet mask
●
Gateway address
●
SSID
●
IP
address of the default router
●
DHCP flag
●
System name
●
System location
●
Syste
●
Device mode
●
Country code
There is no automatic restart. This allows you to enter data using Web Based
Management before the restart. The changes take effect only after a restart.
If you are logged on as user, the Restore Memory Defaults button is not visible.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
lts button
m contact
an leave the browser
116