Commissioning With The Preset Plug - Siemens SCALANCE W788-1PRO Operating Instructions Manual

3 .4

Commissioning with the PRESET PLUG

How It Works
With the PRESET PLUG, it is simple to assign a configuration
such as access points, EC
configuration to any numbe
procedure is particularly useful when commissioning a lot of WLAN clients with the
same parameter settings because you do not need to set parameters for each
client manually.
Note
To avoid duplicating IP addresses, the IP parameters are not changed but are
retained when you use the PRESET PLUG.
If the PRESET PLUG is inserted, the W
WLAN operation with a PRESET PLUG
Note
With a version V3.0 AP or older, it is not possible to create a PRESET-PLUG for
the IWLAN/PB-Link versio
update the IWLAN/PB Link to firmware V1.2, the configuration is available aga
a PRESET PLUG (created with V3.1).
Creating a Configuration with a new PRESET-PLUG
Follow the steps below to save a configuration on a PRESET PLUG:
1. Insert the PRESET PLUG in the C-PLUG slot of a powered-down device with
the required configuration and then turn on the device.
2. Start Web Based M
3. In the Modify C-PLUG list box, select the Create PRESET-PLUG entry.
Operating Instructions SCALANCE W78x
C79000-G8976-C184-07
Description of the SCALANCE W78x
Ms or IWLAN/PB links. You transfer an existing
r of other devices using the PRESET PLUG. This
LAN interface of the device is deactivated.
insert it is not possible.
n V1.1. Please use a version V2.4 AP or older. If you
anagement and select the System > C-PLUG menu.
to WLAN devic es
in on
44