Honda InterceptorVF700F Shop Manual page 255

ITONTf,DA
V45 INTERCEPTOR
H Y D R A U L I C B R A K E
TROl{T
]I|ASTER CYLII{DER
D I S A S S E M B L Y
Drain brake fluid from the hydraulic system.
Remove the brake lever and rear view mirror from
the master cylinder. Disconnect the brake hose.
CAUTION
Avoid spilling brake fluid on painted surfacel
Plqce u rag over the fuel tank whenever the
brake system is being serviced.
NOTE
When removing the fluid hose bolt, cover the
end of the hose to prevent contamination.
Secure the hose to prevent fluid from leaking
o u t .
Disconnect the front brake switch wires.
Remove the front brake master cylinder.
Remove the piston boot and the snap ring from the
master cylinder body.
Remove the secondary cup and piston. Then remove
t h e p r i m a r y c u p a n d s p r i n g .
Remove the brake light switch from the master
cylinder body, if necessary.
Clean the inside of the master cylinder and reservoir
w i t h b r a k e f l u i d .
S N A P R I N G P L I E R S o r E O U I V A L E N T l N U . S . A .
0 7 9 1 4 - 3 2 3 0 0 0 1
e
- e
S
s
w
a
E
P I S T O N
P R I M A R Y C U P
1 6 - 8
D a t e o f l s s u e : J a n u a r y , 1 9 8 3
O H O N D A M O T O R C O . , L T D .