Honda InterceptorVF700F Shop Manual page 237

W H E E L / S U S P E N S I O N
I N S T A L L A T I O N
Install the rear wheel in the reverse order of re-
m o v a l .
N O T E
' When installing the wheel, carefully fit the
brake disc between the brake pads.
'
After installing the wheel, apply the brake
several times. Then check that the wheel
rotates freely. Recheck wheel installation
if the brake drags or if the wheel does not
rotate freely.
Tighten the rear axle nut.
T O R O U E : 8 5 - 1 0 5 N . m ( 8 . 5 - 1 0 . 5 k s - m ,
61-76 ft-tb)
A d j s u t t h e d r i v e c h a i n s l a c k ( p a g e 3 - 1 3 ) .
Sl|OCl( ABSORBER
R E M O V A L
Place the motorcycle on its center stand.
Remove the seat and left frame side cover.
Remove the breather separator and the electric
p a n e l .
Remove the shock absorber lower mounting bolt.
Remover the shock absorber upper mounting bolt,
tilt the shock absorber rearward and remove it
f r o m t h e f r a m e b y p u l l i n g i t u p .
B R E A T H E R S E P A R A T O R
E L E C T R I C P A N E L
U P P E R M O U N T I N G B O L T
L O W E R M O U N T I N G B O L T
1 5 - 8
D a t e o f l s s u e : J a n u a r y , 1 9 8 3
O H O N D A M O T O R C O . . L T D .