Honda InterceptorVF700F Shop Manual page 261

IIONTIDA
V45 INTER,CEPTOR
H Y D R A U L I C B R A K E
Install the caliper assembly over the brake disc so
that the disc is positioned between the pads, being
careful not to damage the Pads.
Install the caliper pivot bolt and caliper bolt and
tighten them securelY.
Connect the brake hose to the caliper with the bolt
and two sealing washers.
Fill the rear brake fluid reservoir and bleed the rear
brake system (page 16-4).
REAR ]YIASTER CYTINDER
R E M O V A L
Drain the rear brake hydraulic
Remove the brake hose bolt
brake hose.
system (page 16-3).
and disconnect the
Loosen the rear master cylinder mount bolts.
Remove the right footpeg bracket.
Unhook the rear brake switch spring from
rear brake actuating arm.
the
S E A L I N G W A S H E R S
R I G H T F O O T P E G B R A C K E T
1 6 - 1 4
D a t e o f l s s u e : J a n u a r y , 1 9 8 3
O H O N D A M O T O R C O . , L T D .