Honda InterceptorVF700F Shop Manual page 160

IIONTf,DA
V45 INTERCEPTOR,
CRANKCASE
Clean the crankcase mating surfaces.
A p p l y l i q u i d s e a l a n t t o t h e m a t i n g s u r f a c e o f t h e
lower and upper crankcase.
CAUTION
Do not apply sealant to the area near the
main bearings.
DO NOT COAT THIS
A R E A .
I n s t a l l t h e d o w e l p i n i n t o t h e l o w e r c r a n k c a s e .
A s s e m b l e t h e c r a n k c a s e h a l v e s , a l i g n i n g t h e s h i f t
forks with the gears.
Tighten the bolts to the specified torque values in
the sequence shown.
T O R O U E V A L U E S :
9 mm bolt: 30-34 N.m
(3.0-3.4 kg-m, 22-25 ft-lbl
8 m m b o l t : 2 1 - 2 5 N . m
12.1-2.5 ks-m, 14*18 ft-lbl
6 m m b o l t : 1 0 - 1 4 N . m
( 1 . 0 - 1 . 4 k s - m , 7 - 1 0 f t - l b )
Tighten the bolts in a crisscross pattern and in 2-3
steps.
mm BOLT
1 1 - 5
D a t e o f l s s u e : O c t o b e r . 1 9 8 3
@ H O N D A M O T O R C O . , L T D .