Honda InterceptorVF700F Shop Manual page 257

ITONTDA
V45 INTER,CEPTOR
H Y D R A U L I C B R A K E
Place the front master cylinder on the handlebar
and install its clamp and two mounting bolts.
Align the index mark on the clamp with the punch
mark on the handlebar. Tighten the upper bolt first,
then tighten the lower bolt.
Install the fluid hose with the bolt and two sealing
washers.
Install the brake lever.
I n s t a l l t h e r e a r v i e w m i r r o r .
Connect the front brake switch wires.
Fill the reservoir to the upper level and bleed the
brake system according to page 16-4.
BRAI(E
CATIPERS
F R O N T B R A K E C A L I P E R R E M O V A L
Place a clean container under the caliper and dis-
connect the brake hose from the caliper.
cAuTtol{
Avoid spilling brake fluid on painted surfaces.
R i g h t c a l i p e r : R e m o v e t h e c a l i p e r p i v o t b o l t a n d
caliper bolt, and remove the caliper.
Left caliper: Remove the caliper pivot bolt and
anti-dive link bolt, and remove the caliper.
R E A R B R A K E C A L I P E R R E M O V A L
Place a clean container under the caliper and dis-
connect the brake hose from the caliper.
CAUT!ON
Avoid spilling brake fluid on the painted
wrfaces to prevent paint damage.
Remove the caliper pivot bolt and caliper bolt,
and remove the rear brake caliper.
R I G H T C A L I P E R
L E F T C A L I P E R
1 6 - 1 0
D a t e o f l s s u e : O c t o b e r . 1 9 8 3
@ H O N D A M O T O R C O . . L T D .