Applying A Qos Policy; Enabling A User Profile - HP 6125G Configuration Manual

Applying a QoS policy

You can apply QoS policies in user profile view to implement traffic management functions.
Follow these guidelines when you apply a QoS policy:
• After a user profile is created, apply a QoS policy in user profile view to implement restrictions on
online users. The QoS policy takes effect when the user profile is enabled and a user using the user
profile goes online.
The QoS policies that can be applied to user profiles support only the remark, car, and filter
•
actions.
• Do not apply an empty policy in user profile view because a user profile with an empty policy
applied cannot be enabled.
If a user profile is enabled, you cannot modify the applied QoS policy (including the ACL that is
•
referenced by the QoS policy) or remove it.
For information about QoS policy configurations, see ACL and QoS Configuration Guide.
•
To apply a QoS policy:
Step
1. Enter system view.
2. Enter user profile view.
3. Apply a QoS policy.

Enabling a user profile

Enable a user profile so that configurations in the profile can be applied by the device to restrict user
behaviors. If the device detects that the user profile is disabled, the device denies the associated user
even the user has been verified by the authentication server.
You can only edit or remove the configurations in a disabled user profile.
Disabling a user profile logs out the users that are using the user profile.
To enable a user profile:
Step
1. Enter system view.
2. Enable a user profile.
Command
system-view
user-profile profile-name
qos apply policy policy-name
{ inbound | outbound }
Command
system-view
user-profile profile-name enable
135
Remarks
N/A
N/A
The inbound keyword applies the
QoS policy to incoming traffic of the
switch (traffic sent by online users).
The outbound keyword applies the
QoS policy to outgoing traffic of the
switch (traffic sent to online users).
Remarks
N/A
A user profile is disabled by
default.