Motors - Kyocera Ri 4530 Copystar Service Manual

2BC/D

(3) Motors

18
1. Image formation motor (IFM) ....................... Drives image formation section.
2. Paper conveying motor (PCM) ..................... Drives paper conveying section and fixing section.
3. Paper feed motor (PFM) ............................... Drives paper feed section.
4. Deck drive motor (DDM) ............................... Drives deck paper feed section.
5. Scanner motor (SM) ..................................... Drives the optical system.
6. Image formation fan motor (IFFM) ............... Cools the image formation section.
7. Toner feed motor (TFM) ................................ Replenishes toner.
8. Toner agitation motor (TAM) ......................... Agitates toner.
9. Upper lift motor (LM-U) ................................ Drives drawer 1 lift.
10. Lower lift motor (LM-L) ................................. Drives drawer 2 lift.
11. Deck right lift motor (DLM-R) ........................ Drives drawer 3 lift.
12. Deck left lift motor (DLM-L) .......................... Drives drawer 4 lift.
13. Main charger cleaning motor (MCCM) ......... Cleans main charger wire and grid.
14. Transfer charger cleaning motor (TCCM) ..... Cleans transfer charger wire.
15. Paper conveying fan motor (PCFM) ............. Attracts paper towards the conveying belt.
16. Cooling fan motor (CFM) ............................. Cools the machine interior.
17. Eject fan motor 1 (EFM1) ............................ Cools the machine interior (around the fixing unit).
18. Eject fan motor 2 (EFM2) ............................ Cools the machine interior (around the fixing unit).
19. Fixing fan motor (FFM) ................................. Cools the machine interior (around the fixing unit).
20. HDD fan motor (HDDFM) ............................. Cools the machine interior (Hard disk drive).
21. Power supply fan motor (PSFM) .................. Cools the machine interior (around the power supply unit).
2-2-4
17
13
19
2
14
15
9
20
21
10
4
12
Figure 2-2-3 Motors
5
1
16
7
8
6
3
11
Machine front
Machine inside
Machine rear