Kyocera Ri 4530 Copystar Service Manual page 182

(12) The leading edge of
the image is sporadi-
cally misaligned with
the original.
Causes
1. Registration clutch, bypass paper feed clutch
or paper feed clutch 1/2/3/4 installed
or operating incorrectly.
(13) Paper creases.
Causes
1. Paper curled.
2. Paper damp.
3. Defective pressure springs.
(14) Offset occurs.
Causes
1. Defective cleaning blade.
Causes
1. Registration clutch, bypass paper feed clutch
or paper feed clutch 1/2/3/4 installed or
operating incorrectly.
Check the installation position and operation of the registration
clutch, bypass paper feed clutch and paper feed clutch 1/2/3/4. If any
of them operates incorrectly, replace it.
Causes
1. Paper curled.
2. Paper damp.
3. Defective pressure springs.
Check the paper storage conditions.
Check the paper storage conditions.
Replace the pressure springs.
Causes
1. Defective cleaning blade.
Replace the cleaning blade (see page 1-6-52).
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
2BC/D
1-5-37