Kyocera Ri 4530 Copystar Service Manual page 213

• Removing the lower paper feed pulley
8. Remove the two springs and tilt the lower
paper feed pulley unit down in the direction of
the arrow.
* Remove the springs from the side of the
guide plate.
9. Remove the stop ring and pull the lower
paper feed pulley shaft in the direction of the
arrow, and then remove the lower paper feed
pulley.
10. Refit all the removed parts.
Springs
Lower paper feed pulley unit
Figure 1-6-18
Lower paper feed shaft
Lower paper feed pulley
Figure 1-6-19
2BC/D
Stop ring
1-6-9