Kyocera Ri 4530 Copystar Service Manual page 90

Maintenance
item No.
U089 Outputting a MIP-PG pattern
Description
Selects and outputs the MIP-PG pattern created in the copier.
Purpose
When performing respective image printing adjustments, used to check the machine status apart from that of
the scanner with a non-scanned output MIP-PG pattern.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the MIP-PG pattern to be output.
Display
GRAYSCALE
MONO-LEVEL
256-LEVEL
1 DOT-LINE
3. To change the output conditions of MONO-LEVEL and 1dot-LINE, use the cursor up/down keys to change
the preset values and press the Start key to register the setting.
Display
Output density of MONO-LEVEL
1dot-LINE
4. Press the interrupt key. The copy mode screen is displayed.
5. Press the start key. A MIP-PG pattern is output.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for maintenance item No. is displayed.
Description
PG pattern to be output Purpose
To check the laser scanner unit
engine output characteristics.
To check the drum quality.
To check resolution
reproducibility in printing.
To check fine line reproducibility.
To adjust the position of the laser
scanner unit (lateral squareness)
Setting range
0 or 70
0 to 21
Initial setting
0
0
2BC/D
1-4-25