Kyocera Ri 4530 Copystar Service Manual page 59

Install the (optional) printer network kit.
3. Remove two screws and take off the cover.
4. Push the printer network kit all the way in
along the rails, and fasten it to the controller
box with two screws.
Install the (optional) hard disk.
5. Remove two screws and take off the cover.
6. Push the hard disk all the way in along the
rails, and fasten it to the controller box with
two screws.
Printer network kit
Cover
Figure 1-3-66
Cover Hard disk
Figure 1-3-67
2BC/D
1-3-31