Table of Contents
Advertisement
2BC/D
Problem
Causes/check procedures
(18)
Electrical problem with the
A paper jam in the
feedshift solenoid.
feedshift section is
Deformed lower feedshift
indicated during
guide.
copying (jam in
feedshift section).
Check if the left and right
Jam code 52/53
feedshift rollers contact
each other.
(19)
Broken duplex feedshift
A paper jam in the
switch actuator.
duplex section is
Defective duplex feedshift
indicated during
switch.
copying (jam in du-
plex tray section).
Jam code 60
Check if the duplex pres-
sure release solenoid mal-
functions.
Electrical problem with the
duplex pressure release
solenoid.
(20)
Check if the duplex eject
A paper jam in the
switching solenoid mal-
duplex section is
functions.
indicated during
Electrical problem with the
copying (jam in du-
duplex eject switching so-
plex feedshift sec-
lenoid.
tion).
Jam code 61
Defective face down eject
switch.
(21)
Broken duplex paper con-
A paper jam in the
veying switch 1 actuator.
duplex section is
Defective duplex paper
indicated during
conveying switch 1.
copying (jam in du-
plex feedshift sec-
tion).
Jam code 62
Defective duplex feedshift
switch.
1-5-16
Corrective measures
Check (see page 1-5-47).
Repair or replace if necessary.
Check visually and remedy if necessary.
Check visually and replace the duplex feedshift switch if its ac-
tuator is broken.
Run maintenance item U031 and turn the duplex feedshift switch
on and off manually. Replace the duplex feedshift switch if indi-
cation of the corresponding switch on the touch panel is not dis-
played in reverse.
Run maintenance item U033 and select the duplex pressure re-
lease solenoid on the touch panel to be turned on and off. Check
the status and remedy if necessary.
Check (see page 1-5-47).
Check and repair if necessary.
Check (see page 1-5-47).
Run maintenance item U031 and turn the face down eject switch
on and off manually. Replace the face down eject switch if indi-
cation of the corresponding switch on the touch panel is not dis-
played in reverse.
Check visually and replace duplex paper conveying switch 1 if
its actuator is broken.
Run maintenance item U031 and turn duplex paper conveying
switch 1 on and off manually. Replace duplex paper conveying
switch 1 if indication of the corresponding switch on the touch
panel is not displayed in reverse.
Run maintenance item U031 and turn the duplex feedshift switch
on and off manually. Replace the duplex feedshift switch if indi-
cation of the corresponding switch on the touch panel is not dis-
played in reverse.
Advertisement
Table of Contents
