Table of Contents
Advertisement
5. Remove the two screws holding the solenoid
bracket and then the bracket.
6. Remove the screw and then remove the feed
guide pin.
7. Remove the E-ring and then the original feed
clutch.
8. Remove the E-ring and then remove the
bushing.
Screw
Feed guide pin
Solenoid bracket
Screws
Figure 1-6-124-3
E-ring
E-ring
Figure 1-6-124-4
2BC/D-1
Original feed clutch
Bushing
1-6-67-2
1-6-69
Advertisement
Table of Contents
