Kyocera Ri 4530 Copystar Service Manual page 41

8. Turn the toner bottle to the original position while
pushing it down, and gently remove it from the
opening for toner replenishment.
9. Close the operation right cover.
Connect the drawer heater relay cable and attach the OFF label.
1. Remove the lower rear cover.
2. Connect the connector of the drawer heater relay
cable to CN12 of the power source PCB.
3. Refit the lower rear cover.
Drawer heater relay cable
Figure 1-3-28
Drawer heater relay cable
Figure 1-3-29
2BC/D-1
Power souce PCB
CN12
1-3-13