Kyocera Ri 4530 Copystar Service Manual page 130

Maintenance
item No.
U332 Setting the size conversion factor
Description
Sets the coefficient of nonstandard sizes in relation to the A4/11" × 8
convert the black ratio in relation to the A4/11" × 8
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/11" × 8
copying and printing respectively.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select copying (COPY) or printing (PRT).
2. Change the setting using the cursor up/down keys.
Display
COPY
PRT
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.
U336 Setting the HDD type
Descrioption
Sets the manufacturer and type of the HDD.
Purpose
To set data according to the manufacturer and type of the new HDD after replacement.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Change the setting using the cursor up/down keys.
Description
HDD type
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.
U339 Setting the drawer heater mode
Description
Sets the drawer heater to ON or OFF for the sleep mode.
Purpose
Change of setting is not needed in principle.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
1
/
2
Description
Size parameter for copying
Size parameter for printing
Setting range
0 to 255
Description
The drawer heater is on even if the main switch is off.
(The drawer heater is always on except during driving.)
The drawer heater is on only if the main switch is off.
(The drawer heater is off if the main switch is on.)
1
/ " size. The coefficient set here is used to
2
" size and to display the result in user simulation.
Setting range
0.1 to 3.0
0.1 to 3.0
Initial setting
0
2BC/D-1
1
/ " size for
2
Initial setting
1.0
1.0
1-4-61