Kyocera Ri 4530 Copystar Service Manual page 265

(6) Detaching and refitting the fixing unit thermistor
Follow the procedure below to check or replace the fixing unit thermistor.
Procedure
1. Remove the fixing unit (see page 1-6-55).
2. Remove the two screws holding the fixing
upper cover and then the cover.
3. Remove the screw holding the fixing unit
thermistor and disconnect the connector, and
then remove the thermistor.
4. Check or replace the fixing unit thermistor
and all the removed parts.
Fixing upper cover
Figure 1-6-113
Fixing thermistor
Figure 1-6-114
2BC/D
Connector
1-6-61