Table of Contents
Advertisement
2BC/D
Problem
Causes/check procedures
(2)
Check if paper feed clutch
A paper jam in the
1 malfunctions.
paper feed section
is indicated during
Electrical problem with pa-
copying (no paper
per feed clutch 1.
feed from copier
drawer 1).
Jam code 10
(3)
Paper in drawer 2 is ex-
A paper jam in the
tremely curled.
paper feed section
Check if the upper paper
is indicated during
feed pulley, lower paper
copying (no paper
feed pulley or upper for-
feed from copier
warding pulley of drawer 2
drawer 2).
are deformed.
Jam code 11
Broken paper feed switch
4 actuator.
Defective paper feed
switch 4.
Check if paper feed clutch
2 malfunctions.
Electrical problem with pa-
per feed clutch 2.
(4)
Paper in drawer 3 is ex-
A paper jam in the
tremely curled.
paper feed section
Broken paper feed switch
is indicated during
6 actuator.
copying (no paper
feed from copier
Defective paper feed
drawer 3).
switch 6.
Jam code 12
Check if paper feed clutch
3 malfunctions.
Electrical problem with pa-
per feed clutch 3.
(5)
Paper in drawer 4 is ex-
A paper jam in the
tremely curled.
paper feed section
Broken deck paper con-
is indicated during
veying switch 1 actuator.
copying (no paper
feed from copier
Defective deck paper con-
drawer 4).
veying switch 1.
Jam code 13
1-5-10
Corrective measures
Run maintenance item U032 and select paper feed clutch 1 on
the touch panel to be turned on and off. Check the status and
remedy if necessary.
Check (see page 1-5-46).
Change the paper.
Check visually and replace any deformed pulleys.
Check visually and replace paper feed switch 4 if its actuator is
broken.
Run maintenance item U031 and turn paper feed switch 4 on
and off manually. Replace paper feed switch 4 if indication of the
corresponding switch on the touch panel is not displayed in re-
verse.
Run maintenance item U032 and select paper feed clutch 2 on
the touch panel to be turned on and off. Check the status and
remedy if necessary.
Check (see page 1-5-46).
Change the paper.
Check visually and replace paper feed switch 6 if its actuator is
broken.
Run maintenance item U031 and turn paper feed switch 6 on
and off manually. Replace paper feed switch 6 if indication of the
corresponding switch on the touch panel is not displayed in re-
verse.
Run maintenance item U032 and select paper feed clutch 3 on
the touch panel to be turned on and off. Check the status and
remedy if necessary.
Check (see page 1-5-46).
Change the paper.
Check visually and replace deck feed switch 1 if its actuator is
broken.
Run maintenance item U031 and turn deck paper conveying
switch 1 on and off manually. Replace deck paper conveying
switch 1 if indication of the corresponding switch on the touch
panel is not displayed in reverse.
Advertisement
Table of Contents
