Kyocera Ri 4530 Copystar Service Manual page 125

2BC/D
Maintenance
item No.
U258 Switching copy operation at toner empty detection
Description
Selects if continuous copying is enabled after toner empty is detected, and sets the number of copies that can
be made after the detection.
Purpose
To change the copying operation after detection of toner empty status.
Method
Press the start key. The screen for selecting an item is displayed.
Display
EMPTY COUNT
EMPTY MODE
Setting the number of copies after turning off of the toner level sensor before indicating toner empty
1. Change the setting using the cursor up/down keys.
Description
Number of copies to be made after turning off of
the toner level sensor before indicating toner empty
The setting can be changed by 100 per step.
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Setting the copy operation after toner empty detection
1. Select single or continuous copying. The selected item is displayed in reverse.
Display
SINGLE
CONTINUE
Initial setting: SINGLE
2. Set the number of copies that can be made using the cursor up/down keys.
Description
Number of copies after toner empty detection
The setting can be changed by 5 copies per step.
When set to 0, the number of copies is not limited regardless of the setting for single or continuous copying.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
1-4-56
Description
Description
Number of copies to be made after turning off of the toner
level sensor before indicating toner empty
Operation of copies after toner empty detection
Setting range
100 to 300 (copies)
Description
Enables only single copying.
Enables single and continuous copying.
Setting range
0 to 200 (copies)
Initial setting
200
Initial setting
5