Cd Changer Functions - Aston Martin DB 9 2013 Manual

Unskip all Channels
This permanently removes all channels from the skip list and makes
them available for selection. Press MENU. Navigate to <Sirius
menu...> Enter <Advanced sirius settings...> Enter <Skip options>
Enter <Channel Unskip all channels> Enter.
Temporally Unskip all Channels
This function will temporarily unskip all channels and make them
available for selection. The channels stay on the skip list and will again
be skipped the next time the ignition is set to ON. Press MENU.
Navigate to <Sirius menu...> Enter <Advanced sirius settings...>
Enter <Skip options> Enter <Temporally Unskip all Ch.> Enter.
8.12
Change Code
This function makes it possible to change the channel access code.
The default code is 0000. To change the code:
Press MENU. Navigate to <Sirius menu...> Enter <Advanced sirius
settings...> Enter <Lock options> Enter <Change Code> Enter.
Enter the current code and press ENTER. Enter the new code and
press ENTER. Confirm the new code and press ENTER. If an incorrect
code is entered, the INCORRECT CODE! is shown in the DISPLAY.
View Access Code
If the access code has been forgotten:
Press MENU> Navigate to <Sirius menu...> Enter <Advanced sirius
settings...> Enter <Sirius ID> Enter. Press and hold ENTER for two
seconds. The current code will be shown.

CD Changer Functions

Loading CDs
Use only 12 cm (4.7 in) CDs. Do not use CDs with adhesive
disc labels. The heat from the CD player can cause the label to
come loose from the disc. The CD player could be damaged.
Do not use CDs that are warped or look warped (critical
measurement for CD warp is 0.7 mm (0.03 in) - anything more
than this may cause problems). The CD player will not be able to
hold the CD correctly (because of the warp), this may cause a jam
in the CD player.
If the quality of the CD does not comply with the requirements of
standard EN60908 or if it has been recorded using poor equipment,
sound quality may be poor or playback interrupted.
The CD changer can hold up to six discs.
Press the MODE button repeatedly to select CD. Select an empty
position using the KEYPAD (buttons 1 to 6) or use the JOYSTICK (up
or down). The DISPLAY shows which positions are empty. Make sure
that 'Insert disc' is shown then insert a new disc.