Tire Pressure Sensing - Aston Martin DB 9 2007 Manual

Tire Pressure Sensing

Warning
Tire pressure sensing is not intended to replace driver
awareness of tire performance or the need for
recommended weekly checks on tire condition and
pressure.
Tire pressure sensing monitors
the vehicle tire pressures and
feeds-back this information to
the driver.
Each road wheel is installed
with a tire pressure sensing
Control
device which sends tire pressure
Unit LED
information to a control unit.
The control unit is mounted in
the front passenger footwell,
near the transmission tunnel,
underneath the front facia.
Each pressure sensing device
has a color coded collar. Ensure the
colored collars are installed correctly,
i.e. after new tires are installed.
Tyre LEDs
Roadwheel Color
Front Right Green
Front Left Red
Rear Right Blue
Rear Left Yellow
Tire pressure sensing is also available on winter wheels and
tires.
Refer to your Aston Martin Dealer.
LED Status
At the start of each journey the control unit LEDs will flash
continuously until a speed of 10 m.p.h. (16 km/h) has been
reached tire. At this speed the LEDs start to receive signals
from the pressure sensing devices in the roadwheels and the
tire LEDs will extinguish one by one.
4.21