Instrument Brightness
During darker hours, a twilight sensor, located at the top of the
windscreen, automatically reduces the brightness of the instrument
cluster to a preset level.
During the daylight hours the level of instrument brightness
defaults to maximum brightness. If the twilight sensor is covered then
the level of brightness will stay low as if in night time mode.
If the master lamp switch is OFF then the instrument brightness
will always be in daylight mode, unless altered manually.
Use the rotary control (B) to
adjust the brightness. Push the
rotary control in and release to
enable the control. Push back in
and release to lock the control.
Reading Lamps
Reading lamps are located in the front environment. To operate the
lamps (ON or OFF) press the individual switches mounted on the
front centre console (A).
Unless set to OFF or ON they will continue to operate up to six
minutes after the ignition is set to OFF.
Trip Computer
Press the TRIP button (A) for less than
three seconds to cycle through the trip
computer functions one at a time. Trip
computer information is viewed in the
message centre.
If an information message shows, after
reading and acting on the information provided
press the READ button (B) to return to the trip
display.
4.15